Castrol Tribol 3020 Range
CASTROL TRIBOL™ 3020/1000 fluid greases with TGOA™ were designed for applications which require goodpumpability of the lubricant and properties to withstand heavy loads. In gear units which are not sealed oil-tight and inlarge slow-speed bearings the CASTROL TRIBOL 3020/1000 greases provide for a sufficient lubricating film due to theirhigh base oil viscosity.
The TGOA additive package outperforms all other EP and antiwear additives because of its unique action onfrictionalsurfaces.
CASTROL TRIBOL 3020/1000 have a lithium soap as thickener. The base oils are high-viscosity mineral oilsforming a stable lubricant film to withstand high continuous loads, shock loads and vibrations.
The TGOA additive package is activated by high specific loads and corresponding temperatures causing achemicalphysical reaction. This results in an equalization of surface roughness without creating abrasion.
The results of the TGOA additives can be compared with a rolling process in the micro-range. The surfaceroughnesses are gradually leveled and smoothed.
Through smoothing of the working surfaces, the loads are distributed over increasing areas and the actual loadcarrying areas are enlarged. During the running-in process, the TGOA additive package creates an optimum ofsmooth contact surfaces.
If, because of shock loads, or stop-and-go operation, surface roughness peaks redevelop, the TGOA additives areautomatically reactivated. Surface roughness is again equalized and lubrication optimized.
Corrosion and oxidation inhibitors maximize effective rust protection and long life of the grease.
CASTROL TRIBOL 3020/1000 meet NLGI consistency grades commonly available for these types of lubricants.
Typical applications for CASTROL TRIBOL 3020/1000 fluid greases are non-oil-tight gear units, rolling and slidingbearings, bushings, slides and general lubrication designed for fluid-grease lubrication.
Operating temperatures range from –40°C to +120°C.
Excellent pumpability in central lubrication systems.
Repairing of damaged friction surfaces (roughness) due to the TGOA additives.
Extended lubrication interval.
Reduced wear and noise.
Lowering of the operating temperatures.
Low downtime thus reducing maintenance and repair costs.
Due to their excellent adhesion, these greases offer an optimum sealing effect.
Typical Characteristics
3020/1000-1 3020/1000-2 3020/1000-0
Subject to usual manufacturing tolerances.
Additional Information
CASTROL TRIBOL 3020/1000 should not be mixed with greases using a different thickener.
CASTROL TRIBOL 3020/1000 greases exceed the minimum requirements for greases „G“ according to DIN 51826.
Application may be made manually with grease guns or automatic dispensing systems, designed for the respectiveNLGI grades Castrol Tribol 3020 Range22 Jul 2011Castrol, the Castrol logo and related marks are trademarks of Castrol Limited, used under licence.
This data sheet and the information it contains is believed to be accurate as of the date of printing. However, no warranty or representation, express or implied, ismade as to its accuracy or completeness. Data provided is based on standard tests under laboratory conditions and is given as a guide only. Users are advisedto ensure that they refer to the latest version of this data sheet. It is the responsibility of the user to evaluate and use products safely, to assess suitability for theintended application and to comply with all applicable laws and regulations. Material Safety Data Sheets are available for all our products and should beconsulted for appropriate information regarding storage, safe handling, and disposal of the product. No responsibility is taken by either BP plc or its subsidiariesfor any damage or injury resulting from abnormal use of the material, from any failure to adhere to recommendations, or from hazards inherent in the nature of thematerial. All products, services and information supplied are provided under our standard conditions of sale. You should consult our local representative if yourequire any further information.


Microsoft word - 03g00_5aa pp21-23.doc

my asthma North Kensington, London, on to a saucer to form a cone, which was then lit at 'After each 1927-1934 the top. The pungent smoke from this spittingI was told that I developed asthma after anVesuvius had to be inhaled deeply. Its beneficial hospital visit attack of measles when I was three years old. effects were short lived - the inhalation provided we went to a O

Copyright © 2010-2014 Internet pdf articles