1) IDENTIFICATION OF THE SUBSTANCE / AND THE COMPANY / UNDERTAKING.
Product Name: LITHIUM GREASE EP 3 Chemical Family: Petroleum Based Lubricating Grease.
Use: Multi-purpose Industrial Lubrication. Manufacturer / Supplier: Global Lubricants Limited. Address: 13 Sandwell Business Development Centre, Oldbury Road, Smethwick, West Midlands B66 1NN Telephone: 0121 5443638 Fax: 0121 5446505 Emergency Telephone: 0121 5443638 2) COMPOSITION / INFORMATION OF INGREDIENTS.
Hazardous Components CAS No Wt %
None of the components needs to be classified. 3) HAZARD IDENTIFICATION. MAIN HAZARDS -------- HEALTH EFFECTS Eyes May cause minor irritation and short-term redness Skin unlikely to cause irritation - possible to sensitive skin types Inhalation N / A Ingestion May cause nausea and diarrhoea 4) FIRST AID MEASURES.
Eyes Wash out all residual material with water. If irritation continues seek medical advice Skin Wash skin with soap and water. Contaminated clothing should be Dry Cleaned before Re-use. Ingestion Wash mouth out with water, Do not induce vomiting, seek medical advice.
5) FIRE FIGHTING MEASURES.
Extinguishing Media Extinguish with; Dry Powder, Foam, Sand or Earth. UNSUITABLE Extinguishing media Water Jet. Protective equipment for Fire Fighting Self contained breathing apparatus.
6) ACCIDENTAL RELEASE MEASURES. Personal Precautions May cause slippery conditions underfoot. Environmental Precautions Do not allow to enter drains or watercourse. Spillage Scrape up in bulk then wipe up remainder with cloth. 7) HANDLING AND STORAGE. Handling Wear Gloves, care should be taken with dispensing equipment not to inject Product under skin. Storage Do not store at elevated temperatures. SAFETY DATA SHEET LITHIUM EP3 GREASE
8) EXPOSURE CONTROL / PERSONAL PROTECTION.
Hand Protection PVC Gloves. Eye Protection Wear glasses if there is a risk of splashing Body Protection Normal work wear Respiratory Protection N /A
9) PHYSICAL & CHEMICAL PROPERTIES.
Physical State Smooth Grease Colour Amber Odour Slight Boiling Point Not determined Melting Point Above 187°C Flash Point > 200°C Auto Ignition Temp > 200°C Flammability Not flammable at ambient temperatures Oxidising properties None Solubility in Water Insoluble
10) STABILITY & REACTIVITY. Stability Stable under normal conditions Conditions to avoid Powerful sources of ignition and extreme temperatures Materials to avoid Strong oxidising agents Hazardous Decomposition Products: Oxides of carbon. 11) TOXICOLOGICAL INFORMATION. Acute Toxicity Not considered toxic under normal handling. Chronic Toxicity N /A Genotoxicity N /A Irritancy – Skin Possible very mild on sensitive skin types. 12) ECOLOGICAL INFORMATION.
Possible Effects Possible marine pollutant
Environmental Consequences Unlikely to cause notable contamination, insoluble in water, poorly absorbed into soils.
13) DISPOSAL CONSIDERATIONS.
Product Disposal Incineration or Landfill, dispose of in accordance with local regulations
14) TRANSPORT INFORMATION.
For Road, Rail & Air Not Classified (No special precautions or labelling necessary)
15) REGULATORY INFORMATION.
Labelling Information N / A Risk Phrases None Safety Phrases None
Hazard symbols: No significant hazard. Note: The regulatory information given above only indicates the principal regulations specifically applicable to the product described in the safety data sheet. The user's attention is drawn to the possible existence of additional provisions which complete these regulations. Refer to all applicable national, international and local regulations or provisions. 16) OTHER INFORMATION. Legal disclaimer: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. This company shall not be held liable for any damage resulting from handling or from contact with the above product.
Product Datasheet Overview Product name Description Specificity This antibody has a Kd of 3 nM for haloperidol and an IC50 value of 260 nM for the reduced haloperidol metabolite(+/-)-4-(4-chlorophenyl)-a-(4-fluorphenyl)-4-hydroxy-1-peperidinebutanol). Tested applications Immunogen Haloperidol conjugated through the tertiary alcohol at the 4’ position of the piperidine ring
Pediatric Pulmonology 44:568–579 (2009)Safety and Tolerability of Montelukast inHans Bisgaard, MD, DMSci,1* David Skoner, MD,2 Maria L. Boza, MD,3 Carol A. Tozzi, PhD,4MD,4 Barbara Knorr, MD,4 and Gertrude Noonan, BASummary. Background: Montelukast is a potent leukotriene-receptor antagonist administeredonce daily that provides clinical benefit in the treatment of asthma and allergic rhiniti
SAFETY DATA SHEET 
SAFETY DATA SHEET