Standort in Deutschland, wo man günstige und qualitativ hochwertige Kamagra Ohne Rezept Lieferung in jedem Teil der Welt zu kaufen.
Kaufen priligy im Online-Shop.
Wirkung ist gut, kommt sehr schnell, innerhalb von 5-7 Minuten. priligy was nur nicht versucht, verbrachte eine Menge Geld und Nerven, und geholfen hat mir nur dieses Tool.
Technical Data Sheet
TSE392, TSE397 and TSE399 adhesive/sealants/coatings are one component RTV's that cure quickly by reacting with atmospheric moisture forming a
soft dielectric silicone rubber. These materials incorporate a newly developed crosslinking chemistry and are non-corrosive to metallic substrates. They
are particularly well suited for electrical/electronic applications.
This series of products differ in consistency, TSE392 is a thixotropic paste, TSE397 is semi-flowable, and TSE399 is flowable. When cured, they retain
their elastomeric properties throughout the operating range of temperature from -55C to 200°C (-67F to 392F).
Key Features and Benefits
Meets the corrosion resistant requirements of MIL-A-46146A*
Outstanding adhesion, including most plastics
Resistant to heat, cold, moisture, UV, ozone and chemicals
One component, no mixing or de-airing required
Soft consistency provides protection against mechanical and thermal shock
Varying viscosities allow thorough coating around complex assemblies (TSE399) and thicker coatings where required i.e., high voltage components
Convenient packaging/dispensing tubes or cartridges.
* Does not meet hydrolytic stability requirement of MIL-A-46146A
Typical Physcial Properties
Nothing contained herein shall be construed to imply the nonexistence of any relevant patents or to constitute a permission, inducement or
recommendation to practice any invention covered by any patent, without authority from the owner of the patent.
Product Safety, Handling and Storage
The warranty period is 12 months from the date of shipment from Momentive Performance Materials if stored in the original unopened container at
temperatures between 5C and 30C (41F and 86F).
Customers should review the latest Material Safety Data Sheet (MSDS) and label for product safety information, safe handling instructions, personal
protective equipment if necessary, and any special storage conditions required for safety. MSDS are available at www.momentive.com or, upon
request, from any Momentive Performance Materials (MPM) representative. For product storage and handling procedures to maintain the
product quality within our stated specifications, please review Certificates of Analysis, which are available in the Order Center
. Use of
other materials in conjunction with MPM products (for example, primers) may require additional precautions. Please review and follow the safety
information provided by the manufacturer of such other materials.
Insure that surfaces to be sealed, coated or bonded are clean and free of grease, lubricating oils, release agents and dirt. To optimize fast cure and good
adhesion, substrates must be thoroughly dry of cleaning solvents before applying the RTV. The RTV should be applied to one surface only. Wipe away
excess uncured material with a clean cloth. After curing, removal of material is more difficult.
These products offer primerless adhesion to many substrates including most plastics. Maximum adhesion is obtained 72 hours after full cure is obtained
(2 mm thick specimen to an aluminum substrate).
These products cure at room temperature reacting with atmospheric moisture. Whenever possible, 25°C (77°F) and 50% relative humidity should be
provided. Higher temperature and humidity will cause faster cures while lower temperatures and lower humidity will slow the cure considerably.
These products cure from the outside (outer skin) inward, therefore, cure rate is also dependent on the thickness of the material. It is not recommended
to apply material thicker than 1/4 inch.
Customers must evaluate Momentive Performance Materials products and make their own determination as to fitness of use in their particular
From automotive to healthcare, from electronics to construction, products from Momentive Performance Materials Inc. are practically everywhere you
look. We are a global leader in silicones and advanced materials with a 70+ year heritage of innovation and being first to market – with performance
applications that improve everyday life. By knowing our customers’ needs and creating custom technology platforms for them, we provide science based
solutions to help customers increase performance, solve product development issues and engineer better manufacturing processes.
For product prices, availability, or order placement, contact our customer service by visiting www.momentive.com/Contacts
For literature and technical assistance, visit our website at: www.momentive.com
Momentive and the Momentive logo are trademarks of Momentive Performance Materials Inc.
The information provided herein was believed by Momentive Performance Materials Inc. (collectively with its subsidiaries, “Momentive”) to be accurate at
the time of preparation or prepared from sources believed to be reliable, but it is the responsibility of the user to investigate and understand other
pertinent sources of information, to comply with all laws and procedures applicable to the safe handling and use of the product, and to determine the
suitability of the product for user's intended application or use. All products supplied by Momentive are subject to Momentive’s standard terms and
conditions of sale. MOMENTIVE MAKES NO WARRANTY, EXPRESS OR IMPLIED, CONCERNING THE PRODUCT OR THE MERCHANTABILITY OR
FITNESS THEREOF FOR ANY PURPOSE OR CONCERNING THE ACCURACY OF ANY INFORMATION PROVIDED BY MOMENTIVE
, except that the
product shall conform to Momentive’s specifications. Nothing contained herein constitutes an offer for the sale of any products.
Multi-State Outbreak of Meningitis Following Epidural Steroid Injections of Methylprednisolone The Centers for Disease Control and Prevention (CDC) and the Food and Drug Administration are coordinating a multi-state investigation of meningitis among patients who had received epidural steroid injection. Many of these patients have also had strokes that are believed to have resulted from their infe
was some long seconds before she started fiddlingfurther with the equipment and it transpired thatthe major problem was with the scanner and notthe baby. Babies don’t have a tendency to freezeFor those of you that don’t already know, this willup and crash all that often as far as we know yet. probably be the last year that it’s just two of usIf there is an equivalent of Murphy’s law